透水磚

Home

About Us

Products

Ecological Permeable Brick

Project

Envrionmental

Responsibility Practice

綠色·環保·實踐

Product

產品展示

City Six Major Elements

海綿城市六大要素

Combining urban vertical elevation with engineering facilities, waterlogging prevention facilities with natural stream system, and surface drainage with escape canal, realizes general emission and over-standard rainwater emission.

海綿城市與傳統城市的區別

Difference

Eight Functions Of Products

產品八大功能

產品四大特點

Four Characteristics

1、Perviousness

Yingchao ceramic permeable brick is made from special inorganic materials burning in 1280 centigrade, with huge pore pipelines outside and inside, mighty water absorption capacity ( its coefficient of permeability over 3.0x10-2cm/s, which is far beyond the products in this market both here and aboard), being able to deal with the rainfall of 60-65mm/h.

2、Water retention

The permeable brick can save huge rainfall (over 60kh/square meter) with its pore pipelines after paving, greatly reduces output volume of urban pipeline runoff, and improves city Waterlogging phenomenon efficiently. It evaporates moisture under the sunshine in order to reduce the heat of field surface and regulate the humidity of air, and provide human a comfortable green life space.

3、Duty-cycle operation

The permeable brick can solve the problems in city construction such as ice stone cement/asphalt/stone-liked tile could not be used again because of the construction, then make solid waste pollution and increase the burden of municipal construction cost. With its unique paving way and design, it can prevent the phenomenon of source waste and produce good economic benefit and society benefit.

4、Crushing resistance,freezing tolerance and wind resistance

Made from inorganic materials, burned in 1280 centigrade high-temperature, and pressed by large-tonnage double press machine, it is the products with strong compressive strength (≥50MPa), rupture strength, weathering resistance, and freezing resistance which reach the country standard, would not be broken, peeled off and full of crakes in the condition of ±25℃ in 50 times, while its strength loss rate ≤3%. It is the ideal outdoor floor products.

Eight Functions Of Products

生態透水磚檢驗報告

Eight Functions Of Products

生態透水磚應用

1、Municipal works paving

the paving way of permeable brick can ensure abundant underground water resources in the district, reduce rainfall flow into other places, solve seasonal drought.

2、Garden paving

A、Beautify the garden, fill the garden integral color missing, work in concern with color of vegetation.

B、Maintain humidity of the earth of garden because of its high permeability, reduce water losing, therefore the vegetation can grow better.

C、The permeable brick made after high-press strength, stands wear and tear, would not cast off and fade, reduces the maintaining cost.

3、Drainage application

It can make the rest moisture flow into the underground pipe from its inside to outside then into the river, meanwhile ensure the quality of district environment, and realize green environment protection.

施工流程

Construction Process

Check and ensure the roadbed is flat and fully rolled

Cover crushed stones whose diameter is ≤40mm for 100mm thickness, then compacted with vibration machine

Cover the non-woven fabrics onto the stone avoiding soil layer separating, and the part of their interfaces should be overlapped in 100mm

Cover the sands for buffer

The thickness of the sands should be 35mm, after using the roller press machine compacting the sands at 30-40m/minute for 3-5 times

Regulate the flatness and height of the sands

Pave the permeable brick. Make the datum line matching with horizontal line after fixed the horizontal line forming right angles. To adjust the height with rubber hammer if the height difference is over ±3mm between surface height and paving measure height.

Regulate sand mortar joint. Use driver regulating the point locations in order to form the straight-line gaps.

Broom the Sand mortar joint into the mortar joint.

ress the permeable bricks and mortar joint firmly. pasting the rubber cover under the roller press machine, then use the roller press machine pressing 30-40mm/minutes at 3-5 times. If the height of the permeable bricks after paved is different, it should hammers them into the same height with rubber hammer.

After clean the bricks surface, sprinkling water can solidify the mortar joint. The permeable bricks cannot be walked on after finished paved. They should be covered if rains.

General Construction Methods

一般施工方法

General Road Construction Methods

一般路面施工方法

The construction methods of Yingchao’s permeable brick is same with chain brick’s. it should be cover a layer of non-woven fabric on the subbase in order to prevent the buffer sands layer running off.

●It is very important of the condition of subbase pressing. If the pressing condition is not good will trigger uneven surface.

●Use the river sands as layer of buffer.

●The thickness should be 20mm-30mm.

●Fully pressed by vibration machine.

●Keep the top of brick for design section.

●Pave the bricks according the design chart.

●Scatter the mortar joint sands in equably (no. 4/ no.5 silica sands).

●The permeable bricks should be pressed firmly with the roller press machine, especially the sides and the end of the machine.

●Pls don’t use vibration compactor which will break the bricks.

Construxtuin Guidance For Special Occasions

特殊場合施工圖

英基陶瓷·時尚藝術生活的智造者

聯系電話：0757-85382312

生產基地：廣東省清遠市清新縣禾云鎮云龍陶瓷基地B區1號

公司地址：廣東省佛山市南莊鎮華夏陶瓷博覽城陶博大道

Top

聯系我們

英基陶瓷

電話：0757-85382312

生產基地：廣東省清遠市清新縣禾云鎮云龍陶瓷基地B區1號

公司地址：廣東省佛山市南莊鎮華夏陶瓷博覽城陶博大道

Cancel

添加微信好友，詳細了解產品

使用企業微信
“掃一掃”加入群聊

復制成功

添加微信好友，詳細了解產品

我知道了

337p日本欧洲亚洲大胆色噜噜 _两个奶头被吃高潮视频 _久久亚洲天天做日日做 _黃色a片三級三級三級